Dowel Pin Puller Kit
Our slide hammer style Dowel Pin Puller removes dowel pins from cylinder heads, blocks, crankshafts, flywheels and any other part with dowel pins installed. This high quality tool is made with pride in the USA. Our superior hardened collets provide a longer useful life and aren't prone to shattering like other foreign made collets on the market.
Operation is fast and easy:
Simply mount the correct size collet on the shaft, place over the dowel pin, use a downward motion with the sliding weight to lock the collet and an upward motion to pull the dowel. To release the collet, insert into the release stand and tap downward on the shaft end with a small hammer.
Kit Contents:
• Slide Hammer Assembly
• Release Stand
• Collets: 1/4”, 5/16”, 3/8”, 7/16”
• Storage Box
Made with pride in the USA
Operation is fast and easy:
Simply mount the correct size collet on the shaft, place over the dowel pin, use a downward motion with the sliding weight to lock the collet and an upward motion to pull the dowel. To release the collet, insert into the release stand and tap downward on the shaft end with a small hammer.
Kit Contents:
• Slide Hammer Assembly
• Release Stand
• Collets: 1/4”, 5/16”, 3/8”, 7/16”
• Storage Box
Made with pride in the USA