6" CBN Flywheel Grinding Wheel
Our 6 inch CBN Flywheel Grinding wheel is the standard wheel found on most flywheel grinding machines. These wheels are compatible with DCM Tech, Kansas Instruments, Kwik-Way, Peterson, RMC, Rogers, Van Norman, Winona Van Norman and other Flywheel Grinding machines with 1-1/4" spindle arbors.
CBN Flywheel Grinding Wheels cut cooler, faster, cleaner and last up to 10 times longer than traditional abrasives. At about half the cost of traditional grinding wheels over the life of the wheel, switching to CBN is an easy decision to make.
Cooler - Less heat = greater accuracy and minimal distortion.
Faster - Less time grinding means less time on the rack and less labor spent waiting for a grind to finish
Cleaner - Coolant and equipment stays cleaner with less abrasive breakdown
Longer - CBN will last up to 10 times longer - at least half the cost of traditional grinding wheels.
Wheel Dimensions: 5.90" diameter x 1.77" tall, 1.25" arbor hole (150MM X 45MM X 31.75MM)
10% DISCOUNT APPLIED TO ORDER OF TWO OR MORE WHEELS
CBN Flywheel Grinding Wheels cut cooler, faster, cleaner and last up to 10 times longer than traditional abrasives. At about half the cost of traditional grinding wheels over the life of the wheel, switching to CBN is an easy decision to make.
Cooler - Less heat = greater accuracy and minimal distortion.
Faster - Less time grinding means less time on the rack and less labor spent waiting for a grind to finish
Cleaner - Coolant and equipment stays cleaner with less abrasive breakdown
Longer - CBN will last up to 10 times longer - at least half the cost of traditional grinding wheels.
Wheel Dimensions: 5.90" diameter x 1.77" tall, 1.25" arbor hole (150MM X 45MM X 31.75MM)
10% DISCOUNT APPLIED TO ORDER OF TWO OR MORE WHEELS