INSERT CBN, 3/8", aluminum heads with precups and aluminum blocks with liners
This is a specially prepared CBN insert that will allow bimetal milling. For use on aluminum blocks with iron liners and aluminum heads with steel pre-combustion chambers.
This exclusive insert is 3/8” (9.52 mm) x .125", single sided. RPM speeds with a 14” (355.6 mm) cutter range from 650-750 RPM. Aluminum cutting fluid aid recommended.
Similar to Rottler 6303S insert.
This exclusive insert is 3/8” (9.52 mm) x .125", single sided. RPM speeds with a 14” (355.6 mm) cutter range from 650-750 RPM. Aluminum cutting fluid aid recommended.
Similar to Rottler 6303S insert.