CBN Insert - .500 diameter for Diesel/Bimetal Cutting
CBN500SED Diesel is a 1/2" (.500 inch x .1875" thick) IC, single sided, CBN Insert. For use on cast iron heads with steel precombustion chambers.
Bi-metal Surfacing includes cylinder heads with Pre-combustion Chambers and Aluminum Blocks with Hard Sleeves.
Cylinder heads with pre-combustion chambers or aluminum engine blocks with cast iron or steel cylinder sleeves are a challenge to cut and most often require a special cutting insert and special cutting technique. There are many different material combinations so there is not one insert that works the best on all applications.
Bi-metal Surfacing includes cylinder heads with Pre-combustion Chambers and Aluminum Blocks with Hard Sleeves.
Cylinder heads with pre-combustion chambers or aluminum engine blocks with cast iron or steel cylinder sleeves are a challenge to cut and most often require a special cutting insert and special cutting technique. There are many different material combinations so there is not one insert that works the best on all applications.