Head Surfacer Belt - 80 Grit Red Alox
Cylinder Head Resurfacing Belt - 18" x 161-5/8" Dark Red Aluminum Oxide for Cast Iron - 80 Grit
• Each belt is manufactured with good quality, red aluminum oxide abrasive grains that are treated for extra long life. Aluminun oxide belts should be used for cast iron cylinder heads only and down pressure is optional.
• 18 inch wide by 161-5/8 inch belts will fit the following machines: Storm Vulcan / Anderson AB1800A, Peterson PG-1800
• Each belt is manufactured with good quality, red aluminum oxide abrasive grains that are treated for extra long life. Aluminun oxide belts should be used for cast iron cylinder heads only and down pressure is optional.
• 18 inch wide by 161-5/8 inch belts will fit the following machines: Storm Vulcan / Anderson AB1800A, Peterson PG-1800