Head Surfacer Belt - 36 Grit Black Silicon Carbide
Cylinder Head Resurfacing Belt - 11-7/8" x 76" Black Silicon-Carbide for Cast Iron and Aluminum – 36 Grit
• Each belt is manufactured with good quality, black silicon-carbide abrasive grains that are treated for extra long life. Silicon-carbide belts can be used on cast iron and aluminum. Aluminum surfaces best with 60 or 80 grit belts. Down pressure is optional for cast iron, not recommended for aluminum.
• 11-7/8 inch wide by 76 inch belts will fit the following machines: Winona Van Norman BG-600, McGlogan
• Each belt is manufactured with good quality, black silicon-carbide abrasive grains that are treated for extra long life. Silicon-carbide belts can be used on cast iron and aluminum. Aluminum surfaces best with 60 or 80 grit belts. Down pressure is optional for cast iron, not recommended for aluminum.
• 11-7/8 inch wide by 76 inch belts will fit the following machines: Winona Van Norman BG-600, McGlogan