Head Surfacer Belt - 36 Grit Black Silicon Carbide
Cylinder Head Resurfacing Belt - 14" x 107" Black Silicon-Carbide for Cast Iron and Aluminum – 36 Grit
• Each belt is manufactured with good quality, black silicon-carbide abrasive grains that are treated for extra long life. Silicon-carbide belts can be used on cast iron and aluminum. Aluminum surfaces best with 60 or 80 grit belts. Down pressure is optional for cast iron, not recommended for aluminum.
• 14 inch wide by 107 inch belts will fit the following machines: Kwik-Way 870
• Each belt is manufactured with good quality, black silicon-carbide abrasive grains that are treated for extra long life. Silicon-carbide belts can be used on cast iron and aluminum. Aluminum surfaces best with 60 or 80 grit belts. Down pressure is optional for cast iron, not recommended for aluminum.
• 14 inch wide by 107 inch belts will fit the following machines: Kwik-Way 870