Head Surfacer Belt - 40 Grit Black Silicon Carbide
Cylinder Head Resurfacing Belt - 14" x 113-1/4" Black Silicon-Carbide for Cast Iron and Aluminum – 40 Grit
• Each belt is manufactured with good quality, black silicon-carbide abrasive grains that are treated for extra long life. Silicon-carbide belts can be used on cast iron and aluminum. Aluminum surfaces best with 60 or 80 grit belts. Down pressure is optional for cast iron, not recommended for aluminum.
• 14 inch wide by 113-1/4 inch belts will fit the following machines: Storm Vulcan / Anderson AB1000A, Peterson PG-1400, Kansas Instruments PG-1400, Master Tool 1441
• Each belt is manufactured with good quality, black silicon-carbide abrasive grains that are treated for extra long life. Silicon-carbide belts can be used on cast iron and aluminum. Aluminum surfaces best with 60 or 80 grit belts. Down pressure is optional for cast iron, not recommended for aluminum.
• 14 inch wide by 113-1/4 inch belts will fit the following machines: Storm Vulcan / Anderson AB1000A, Peterson PG-1400, Kansas Instruments PG-1400, Master Tool 1441