Head Surfacer Belt - 40 Grit Ceramic
Cylinder Head Resurfacing Belt - 11-7/8" x 89" Maroon Ceramic for Cast Iron and Steel – 40 Grit
• Each belt is manufactured with the best quality, maroon ceramic abrasive grains with a perfectly uniform grain. Ceramic belts will outlast all other types of belts. Best used on Cast Iron and Steel with down pressure.
• 11-7/8 inch wide by 89 inch belts will fit the following machines: Rogers RMC800, Winona Van Norman PG-1229, Serv-Equip PG-1229
• Each belt is manufactured with the best quality, maroon ceramic abrasive grains with a perfectly uniform grain. Ceramic belts will outlast all other types of belts. Best used on Cast Iron and Steel with down pressure.
• 11-7/8 inch wide by 89 inch belts will fit the following machines: Rogers RMC800, Winona Van Norman PG-1229, Serv-Equip PG-1229