1.625" Valve Seat Counterbore Cutter - Replaceable Inserts
1.625" Valve Seat Counterbore Cutter - Replaceable Inserts
Actual cutting diameter is .005 inch under the stated cutter size to provide an interference fit necessary for proper valve seat installation. For more information about required interference fit, contact the valve seat manufacturer.
• 2 replaceable cutting tips, each with 4 edges
• When an edge wears, rotate the tip to a new edge or replace with a new carbide insert
• Bodies come with 2 inserts, screws and wrench
• Counterbore Cutters Will cut below stated size for press fit of the seat
For use with DCM Tech and Winona Guide and Seat machines.
Actual cutting diameter is .005 inch under the stated cutter size to provide an interference fit necessary for proper valve seat installation. For more information about required interference fit, contact the valve seat manufacturer.
• 2 replaceable cutting tips, each with 4 edges
• When an edge wears, rotate the tip to a new edge or replace with a new carbide insert
• Bodies come with 2 inserts, screws and wrench
• Counterbore Cutters Will cut below stated size for press fit of the seat
For use with DCM Tech and Winona Guide and Seat machines.