Neway Valve Seat Cutter Kit - Honda Motorcycles
KM2487 Kit for Honda Motorcycles
Kit Includes the Following:
Cutter Bodies:
- 144 Cutter — Blades fixed at O.D. of .758” 32˚
- 132 Cutter — Blades fixed at O.D. of .830” 32˚
- 131 Cutter — Blades fixed at O.D. of .850” 45˚
- 133 Cutter — Blades fixed at O.D. of .874” 60˚
- 143 Cutter — Blades fixed at O.D. of .925” 45˚
- 142 Cutter — Blades fixed at O.D. of .925” 32˚
- 122 Cutter — 1” dia. 45˚
- 123 Cutter — 1” dia. 31˚
- 111 Cutter — 1” dia. 60˚
- 270 Cutter — 1-1/4” dia. 60˚
- 607 Cutter — 1-1/4” dia. 30˚
- 608 Cutter — 1-1/4” dia. 45˚
- 626 Cutter — 1-1/2” dia. 30˚ x 45˚
Valve Guide Pilots:
- 100-3.8 Solid Pilot — 3.8mm dia.
- 100-3.82 Solid Pilot — 3.82mm dia.
- 100-4.0 Solid Pilot — 4.0mm dia.
- 100-4.02 Solid Pilot — 4.02mm dia.
- 100-4.5 Solid Pilot — 4.5mm dia.
- 100-4.52 Solid Pilot — 4.52mm dia.
- 100-4.55 Solid Pilot — 4.55mm dia.
- 100-5.0 Solid Pilot — 5.0mm dia.
- 100-5.02 Solid Pilot — 5.02mm dia.
- 100-5.5 Solid Pilot — 5.5mm dia.
- 100-5.52 Solid Pilot — 5.52mm dia.
- 100-6.6 Solid Pilot — 6.6mm dia.
- 140-5.0 Solid Pilot — 5.0mm dia.
- 140-5.5 Solid Pilot — 5.5mm dia.
- 140-6.0 Solid Pilot — 6.0mm dia.
- 140-6.02 Solid Pilot — 6.02mm dia.
- 140-6.6 Solid Pilot — 6.6mm dia.
- 140-6.98 Solid Pilot — 6.98mm dia.
Accessories:
- TW505 T-Wrench
- TW503-1 Adaptor. 1/2” to 3/8”
- CA497 Case
- KACC246 Accessories Kit
*Item image is for informational purposes only and is a general representation of the contents of a kit. The exact contents of the kit are listed above.
Valve Seat Cutting with Neway
Valve seat reconditioning is simple, accurate, and clean with Neway’s carbide-bladed cutters. Neway’s user-friendly valve seat cutters allow you to precisely machine a multi-angle valve seat in a matter of minutes. Tungsten carbide leaves a perfectly flat, machined surface, ideal for optimal sealing efficiency and heat transfer.
Product Instructions:
Neway Cutter Instruction Manual (1.9 MB Requires Adobe Acrobat Reader)