General Japanese Motorcycle Kit

Neway KM2563 General Japanese Motorcycle Kit
For use on most metric motorcycles and ATVs, Japanese and European. Will cut seats where valve sizes range from 19mm (3/4”) to 44mm (1-3/4”).

Kit Includes the Following:

Cutter Bodies:

131 Cutter — Blades fixed at O.D. of .850” 45˚
132 Cutter — Blades fixed at O.D. of .830” 32˚
133 Cutter — Blades fixed at O.D. of .874” 60˚
122 Cutter — 1” dia. 45˚
123 Cutter — 1” dia. 31˚
111 Cutter — 1” dia. 60˚
120 Cutter — 1” dia. 15˚
270 Cutter — 1-1/4” dia. 60˚
607 Cutter — 1-1/4” dia. 30˚
608 Cutter — 1-1/4” dia. 45˚
205 Cutter — 1-1/2” dia. 60˚
626 Cutter — 1-1/2” dia. 30˚ x 45˚

Valve Guide Pilots:

100-4.0 Solid Pilot — 4.0mm dia.
100-4.5 Solid Pilot — 4.5mm dia.
100-5.0 Solid Pilot — 5.0mm dia.
100-5.5 Solid Pilot — 5.5mm dia.
100-5.52 Solid Pilot — 5.52mm dia.
100-6.0 Solid Pilot — 6.0mm dia.
100-6.6 Solid Pilot — 6.6mm dia.
140-5.0 Solid Pilot — 5.0mm dia.
140-5.5 Solid Pilot — 5.5mm dia.
140-6.6 Solid Pilot — 6.6mm dia.
140-6.98 Solid Pilot — 6.98mm dia.
140-7.0 Solid Pilot — 7.0mm dia.
140-7.02 Solid Pilot — 7.02mm dia.
140-8.0 Solid Pilot — 8.0mm dia.
140-8.02 Solid Pilot — 8.02mm dia.

Accessories:

TW505 T-Wrench

TW503-1 Adaptor. 1/2” to 3/8”

CA497 Case

KACC246 Accessories Kit

*Item image is for informational purposes only and is a general representation of the contents of a kit. The exact contents of the kit are listed above.

Valve Seat Cutting with Neway
Valve seat reconditioning is simple, accurate, and clean with Neway’s carbide-bladed cutters. Neway’s user-friendly valve seat cutters allow you to precisely machine a multi-angle valve seat in a matter of minutes. Tungsten carbide leaves a perfectly flat, machined surface, ideal for optimal sealing efficiency and heat transfer.

Product Instructions:
Neway Cutter Instruction Manual (1.9 MB Requires Adobe Acrobat Reader)